Showing all 11 results
Award winning, internationally renowned and industry leading range of air induction nozzles. Manufactured in Britain, these precision made LERAP 3 star rated nozzles are suitable for most sprayers including VLV, HV applications and knapsacks. Ten nozzle variations are available with application rates ranging from 20 – 905 litres per hectare.
Achieve up to 90% drift reduction, and cover a wider application rate (volume) from each nozzle size in use. Get the same rates of coverage that you would normally need 3 nozzles to achieve. The nozzles are available as either straight down or angled (30 degree) versions.
PWM bodies will enable the correct application from each nozzle even when going around a corner where the outer edge of the boom is travelling much faster than the inner edge, so giving a lower rate of application. PWM corrects this by changing the duty cycle at each nozzle to compensate accordingly.
Offers the operator the benefit of angling the spray 30°, forwards or backwards along the spray boom whilst using their existing 8mm air induction or flat fan nozzles. Angled caps eliminate the need to purchase expensive replacement nozzles.
Conventional flat fan (110°) nozzles ideal for the overall spray application of herbicides, fungicides, insecticides and growth regulators. Moulded in polyacetal and colour coded to ISO guidelines.
Standard 8mm Nozzle Cap and washer
Find a Distributor
These one-piece moulded nozzles are compatible with “US style” bayonet fittings. Easy to clean and change. Pressure operating range 2-4 bar. The nozzles featured below have a ceramic tip.
Find a Distributor
Click for datasheet
The Twin Cap with US style bayonet fitting, designed specifically for the Air Bubble Jets, gives forward and backward-facing angles to improve spray penetration. Enabling faster speeds, higher volumes and increased crop penetration. Also suitable for use with standard flat fan nozzles
Find a distributor
Our stores stock a wide range of spraying washers, nozzle filters and fittings.